Embedded & Hardware

CMX Systems Products

Small and fast real-time software, including real-time operating systems (RTOS), TCP/IP stacks and C compilers for embedded systems designers.

Segger Products

SEGGER Microcontroller provides professional development and production solutions for the embedded market

Flasher ARM

Flasher ARM is a programming tool for microcontrollers with on-chip or external Flash memory and ARM7/9/11 or Cortex-M/R/A core. Flasher ARM is designed for programming flash targets with the J-Flash software or stand-alone.

Main features

• Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program)
• Support for ARM7/9/11 and Cortex-M/R/A cores
• Ethernet interface
• No power supply required, powered through USB

Flasher Compact

Flasher Compact is the compact sibling of the Flasher PRO, primarily designed for installation into production rigs or automated test equipment (ATE) where production space is limited.

Main features

• Compact universal stand-alone programmer
• Holes for mounting make target side assembly easy
• Includes the Flasher software package
• Includes the license to program all supported devices
• No additional licenses required. No hidden costs. No future costs.
• Future proof: Software, firmware updates, and new flash loaders, are free of charge

Flasher Hub

High-volume gang programming at maximum speed

The Flasher Hub controls multiple Flasher Compacts so that they program simultaneously. Up to 24 Flashers can be connected to create a single, powerful gang programmer for efficient high-speed parallel programming.

Main features:

• Scalability: Up to 24 individual parallel programming channels with their own circuit memory
• Reliability
• Longevity
• Built-in web & FTP server for easy setup
• Multi-platform: Includes application software for Linux, macOS, and Windows
• No license required. No hidden costs. No future costs.
• Future proof: Software, firmware updates, and new flash loaders, are free of charge.

Flasher PRO & PRO XL

Flasher PRO is a programming tool for microcontrollers with on-chip or external Flash memory and ARM7/9/11, Cortex-M/R/A, RX or PPC core. Flasher PRO is designed for programming flash targets with the J-Flash software or stand-alone.

Main features

• Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program)
• Ethernet interface
• Supports internal and external flash devices
• Wide range of devices are supported
• Free firmware updates
• 128 MB internal NAND flash, used for storing configuration and data files
• Serial in target programming supported

Flasher Portable PLUS

Flasher Portable PLUS is a programming tool for microcontrollers with on-chip and external Flash memory.

Flasher Portable PLUS has been designed to fill the need of an extremely portable, production grade Flash programmer used for in-field firmware updates. No need to be tethered to an outlet, it is powered by standard batteries. Flasher Portable programs flash targets in stand-alone mode or via J-Flash PC software.

Main features

• Stand-alone in-circuit programmer (Once set up, Flasher can be controlled without the use of a PC program)
• Powered by internal battery, no external power supply required
• Up to 10 hours programming with one battery charge
• Supports having up to eight configurations/data files being stored on Flasher

Flasher Secure

Flasher Secure

Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the programming process at contract manufacturers (CM) and similar environments.

Main features

• Authenticated production
• Production volume control
• CM administration and setup portal
• Ultra fast programming
• Support for Cortex-M/R/A, RX, PPC
• Prevents production of counterfeit units
• No overhead in programming time
• Secure your production at contract manufacturers

J-Link PLUS & PLUS Compact

J-Link PLUS is a USB powered JTAG emulator supporting a large number of CPU cores.
Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes.

Main features

• Comes with integrated licenses for: Unlimited breakpoints in flash memory, RDI / RDDI and J-Flash
• Fully compatible to the standard J-Link
• Direct download into flash memory of most popular microcontrollers supported

J-Link PRO

J-Link PRO is a refined version of the regular J-Link. It has an Ethernet interface in addition to the USB interface, as well as two additional LEDs which are used as hardware status indicators. It connects via Ethernet or USB to the host, running Windows, Linux or Mac OS X.

Main features

• Fully compatible to J-Link.
• Ethernet interface. USB 2.0 Hi-Speed interface
• Supported CPUs: Any ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4, Cortex-R4/R5 and Renesas RX100 / RX200 / RX610 / RX621 / RX62N / RX62T / RX630 / RX631 / RX63N

J-Link Ultra+

J-Link Ultra+ is a JTAG/SWD emulator designed for ARM/Cortex and other supported CPUs. It is fully compatible to the standard J-Link and works with the same PC software.

Main features

• Comes with integrated licenses for: Unlimited breakpoints in flash memory, RDI / RDDI and J-Flash.
• Fully compatible to standard J-Link.
• Very high performance for all supported CPU cores.
• Download speed up to 3 MByte/second Hi-Speed-USB 2.0 interface.

J-Trace PRO for Cortex-M

J-Trace PRO for Cortex-M is setting a new standard for trace probes. It enables continuous streaming trace via its Gigabit Ethernet interface, lifting the limitations by internal buffers and slow data transmission. J-Trace PRO can capture complete traces over long periods – thereby enabling the recording of infrequent, hard-to-reproduce bugs. This is particularly helpful when the program flow ‘runs off the rails’ and stops in a fault state.

Main features

• Supports Streaming Trace (trace data is streamed to PC/debugger in real time, unlimited trace buffer)
• Has all the J-Link functionality
• Gigabit Ethernet interface
• Works with all currently available Cortex-M devices up to 300 MHz trace clock
• Supports tracing on Cortex-M0/M0+/M1/M3/M4/M7 targets

J-Trace for Cortex-M

J-Trace for Cortex-M is a JTAG emulator designed for Cortex-M cores which includes trace (ETM) support. J-Trace for Cortex-M can also be used as a J-Link and it also supports ARM7/9 cores. Tracing on ARM7/9 targets is not supported.

Main features

• Has all the J-Link functionality
• Hi-Speed-USB 2.0 interface
• JTAG speed: 25 MHz Works with all currently available Cortex-M devices at 100 MHz trace clock
• Supports tracing on Cortex-M0/M0+/M1/M3/M4 targets